Wrapping packaging machine is now used by many customers of large packaging equipment, wrapping packaging machine is mainly used to wrap the product, which is a relatively large packaging equipment, so customers after the purchase of the wrapping packaging machine, we must develop the appropriate safety procedures, the following is a brief introduction to the safety procedures of the wrapping packaging machine.

I. Before operation

1. Confirm the power supply used by the winding machine, do not plug in the wrong power supply. The voltage of the machine produced by each equipment manufacturer is not uniform, so it must be grounded and protected from electric leakage.

2、Check whether the winding film is correctly dressed.

3. Check whether the insulation of the power supply wire is intact.

4, whether the machine is running empty when the action is normal.

5, there is the need to develop the appropriate operator to operate, special training.

II. In operation

1、When the machine is in operation, it is strictly forbidden to put your foot on top of the machine turntable.

2、It is not allowed to install the machine on a soft ground.

3、It is not allowed to wash the machine with water. If the workplace is wet, the operator should not work barefoot.

4. Do not place objects to be wound on the edge of the turntable.

5、In case of emergency, press the emergency stop switch to disconnect the motor power and use the machine to stop in an emergency.

Ⅲ, after the operation

1、Please unplug the power supply when the machine is not in use.

2、The main parts components should be lubricated with oil frequently.

3、After finishing the day's work, the machine should be cleaned once.

4、To ensure safety, only electrical technicians can overhaul electrical equipment.

Ⅳ, when the winding machine failure problem occurs, we must pay attention to ask the special technical personnel to repair, the user should not blindly repair to avoid the danger, and we must pay attention to cut off the power supply first when repairing.

Ⅴ, when repairing the winding machine, the first thing to confirm is that the power supply is not connected, and if the maintenance personnel can repair, then repair, if the maintenance personnel can not repair properly, you can contact the supplier for repair, do not blindly carry out.

For the safety operation procedures of winding machine, our enterprise must make suitable safety operation procedures combined with the actual situation of the winding machine after purchase, and require the staff to operate according to the operation procedures, because this can ensure our safe production, Jinan Liyang is a professional production winding machine manufacturers, if you need customers can contact us, we look forward to your call.