The fully automatic packaging machine is an efficient packaging equipment that is widely used in various industries such as food, medicine, chemicals, daily chemicals, toys, etc. Among them, the horizontal fully automatic packaging machine is another common packaging machine type. This article will introduce the process principle of the horizontal fully automatic packaging machine.

Equipment overview

Horizontal fully automatic packaging machines usually consist of a conveyor system, automatic bag taking device, automatic sealing device, automatic cutting device, PLC control system, etc. The conveying system feeds the unpackaged products into the packaging machine. The automatic bag taking device will automatically take out the bags from the tray where the bag materials are stored and open them. The device will move the opened bags to the product chamber and then put the products into the bags. middle. The automatic sealing device will seal and compact the bag, and the automatic cutting device will cut the bag and send it to the next process. The PLC control system is responsible for the control and monitoring of the entire production process.

Process principle

The process principle of the horizontal fully automatic bagging machine is as follows:

First, the conveyor system sends the unpackaged products to the automatic bag taking device through the conveyor belt. The bag taking device automatically takes out the bag and opens it. Under the action of the guide device, the bag is moved to the bottom of the vertical forming tube. When the bag moves to this position, the sealing device first measures the length of the bag, and then transfers the bag from the bag taking device into the vertical forming tube through a robot hand, while also opening the bag.

Next, the product enters the bag through the slide. At the same time, the synchronously flying forming tube and film material are continuously sent upward. The forming material is guided to the vertical forming tube wall, and the film is wrapped around the outside of the forming tube to form a complete bag. Under the operation of the machine, the forming tube slowly moves upward.

When the forming tube moves to the highest point, the sealer locks the bag mouth and heats it to seal the bag mouth. After the sealing is completed, cold air is used to warm the forming tube. The forming tube moves downward, and the bag is cut off and slips out of the machine. The process Finish.

Technical advantages

The process principle of the horizontal fully automatic packaging machine has the following technical advantages:

1. Efficient performance: high degree of automation, high production efficiency, and able to complete product packaging quickly and accurately.

2. Safe and reliable: It adopts PLC control system with automatic detection and alarm functions, which can ensure the safety and stability of the production process.

3. High product quality: The use of high-quality materials for packaging ensures the freshness and quality of the product.

4. Environmental protection and energy saving: The equipment generates less waste during operation and reduces the contact between personnel and machines, effectively saving energy and labor.

To sum up, the horizontal fully automatic packaging machine is a packaging equipment with stable performance, safety and reliability, high discharge and energy saving on the current market. For enterprises, the correct use and maintenance of fully automatic packaging machines can improve production efficiency, shorten the production cycle, and create better economic benefits for the enterprise.