Automatic winding machine is an indispensable equipment in packaging products, and there is a great demand for it in the market. Although more people use it, not many people really recognize the winding packaging machine, and the general customers only know its function, specifically, how to realize it, it is unknown. For automatic winding machine, the main function is the winding work, it is quite necessary to understand its winding process.

Generally speaking, there are two kinds of superhuman ways for automatic winding machine, one is manual winding and the other is automatic winding.

Manual winding: drop the film frame to the bottom, put the goods on the chassis, put the film roll on the roll seat, put the film on the roll seat according to the way of film threading, then, start the turntable motor to make the turntable rotate, at this time, the film will be wrapped around the bottom of the goods, when the number of wrapped laps reaches the degree you need, press the film frame rising button to make the frame rise to the required position (photoelectricity is effective in measuring the height): press the film frame dropping button and the film frame drops to the bottom. Repeat the above process to finish the packing, press stop to finish. Not only the stretch film wrapping machine, but also other packaging equipment such as balers and shrink machines have this manual operation.

Automatic Winding: Make the stretch film automatic winding machine in the initial state, put on the goods, put on the film, choose the number of up and down, the number of times up and down, and the time to go over the top, then press the automatic start button, the whole process will be finished automatically.

The automatic winding machine is in the initial position, press the automatic running button, the turntable starts to accelerate, the film is output with the turntable, the turntable counts at this time, and the film system starts to rise when it reaches the bottom set value. When the film system rises to the photoelectric switch irradiation of goods, the film system stops rising after a delayed set time, the up and down times counted 1 time, the turntable continues to run, the turntable counts, when it reaches the set number of laps of the top layer, the film system falls, falls to the bottom when the film system stops, the up and down times counted 1 time and start counting the bottom layer of the number of laps and so on until the up and down times to reach the set value of the completion of the packaging process, tray The turntable of the automatic wrapping machine slowly reduces the speed, stops the clamping knife at the initial detection point and starts to break the film, after the film breaks, the whole packing of the goods is completed, if the film is torn when the goods are in the state of packing, or there is no film for three seconds, the machine is in the state of pause. The display shows no film alarm. Put the film back on the good. Press auto and the machine starts to run.

Alarm Function of Automatic Winding Machine: When the machine has no film alarm and the machine is in the home position, press the automatic button, the turntable will start to run. When the film feeding motor is not running. When the film feeding motor is not running, the winding machine will be broken or no film by default, and the display will show the dynamic no-film alarm on the monitor. After the film is put on, press Auto again, and the machine will be operated normally according to the parameters set before.

Below is a picture of an automatic winding machine produced, developed and sold by Li-Young.From the picture above we can see the quality of our machines, our machines are well-designed, rigorously produced, and most importantly, our prices are reasonable, by the majority of customers welcome. And the details of the processing is also very in place, is a very important attention to detail manufacturers, which also reflects the attitude of Li-Yang do things, but also Li-Yang equipment is widely popular reasons.