Winding film manufacturers remind you of the precautions for use:

1. Try to reduce the appearance of the two ends of the folds and the middle of the red compression of the line, which will seriously affect the aesthetics.

2. will lead to customers with this winding film when a pull will break the phenomenon, crating, pay attention to maintain the edge do not collision phenomenon, resulting in the edge of the broken caused by the quality problem, as long as there is a little bit of cracking, which is also a rare customer reflection of the problem, there can not be a burr edge.

3. Can not be long on one side and short on the other, each side of the white standard is about 1 cm, the paper tube must be aligned.

4. If the cut neatly uneven can not be shipped as scrap, including making goods when the ends must be rolled neatly, the edge of the broken material to cut neatly, not this side of more than that side less.

5. Mould head should be washed clean, no black impurities, there can be no burnt plastic fall into, if the naked eye can find the need to immediately remove.